New Manufacturing Industries In India
A complete list of new plants that manufactures batteries and accumulators, bearings, gears, gearing elements, domestic appliances, electronic equipment, general purpose machinery elements, paper, plastics products and other general large scale manufacturing units.
New Limestone Crusher Mfg. Project in Balodabazar Bhatapara, Chhattisgarh
Executive Summary: A cement company is planning to establish a Limestone Crusher project in Chhattisgarh, with a capacity of 1000 TPH. The project aims to enhance raw material processing capabilities for cement production. As of January 2025, the company has received the necessary consent from the state pollution control authorities to move forward with the establishment.
-
Industry: Manufacturing
State: Chhattisgarh
Investment Range: NA
18 February 2025
New Detergent Products Mfg. Project in Balod, Chhattisgarh
Executive Summary: A company is planning a new detergent products manufacturing project in Balod, Chhattisgarh. The project will produce detergent cake (5000 kg/year), detergent powder (100,000 kg/year), and scrubbers (20,000 units/year). The estimated cost is not specified. As of January 2025, the company has received approval from the state pollution control authorities to establish the project.
-
Industry: Manufacturing
State: Chhattisgarh
Investment Range: NA
18 February 2025
Rs.480 Million New Rubber Goods Mfg. Unit in Mahabubnagar, Telangana
Executive Summary: A new rubber goods manufacturing unit is being set up in Mahabubnagar, Telangana, with an investment of Rs. 480.6 million. The facility will produce foam tubes, sheets, nitrile rubber insulation, and EPDM products. As of February 2025, the project has received environmental clearance from state authorities, paving the way for its establishment.
-
Industry: Manufacturing
State: Telangana
Investment Range: From 100 Million to 999 Million
18 February 2025
Rs.250 Million New Wind Turbine Blade Plant in Vijayapura, Karnataka
Executive Summary: A new wind turbine blade plant is set to be established in Vijayapura, Karnataka, with an investment of Rs. 250 million. The project aims to support the development of 3,000 MW of wind energy in collaboration with the state government. As of February 2025, agreements have been formalized, and preparations are underway.
-
Industry: Manufacturing
State: Karnataka
Investment Range: From 100 Million to 999 Million
18 February 2025
New Boxes, Corrugated Sheet Mfg. Project in Bilaspur, Chhattisgarh
Executive Summary: A new manufacturing unit for boxes and corrugated sheets is being set up in Sirgitti Industrial Area, Bilaspur, Chhattisgarh, with a production capacity of 4,500 MT. The project aims to enhance packaging solutions using advanced technology. As of January 2025, it has received consent from the state pollution control authorities for establishment.
-
Industry: Manufacturing
State: Chhattisgarh
Investment Range: NA
17 February 2025
Rs.5100 Million Precision Engineering Components Mfg. Expansion Project in Karnataka
Executive Summary: A precision engineering components manufacturing expansion is planned in KIADB, Karnataka, focusing on electronics, semiconductor, and solar industries. The project, with an estimated cost of Rs. 5100 million, aims to enhance design and production capabilities. As of February 2025, 10 acres of land will be acquired from KIADB to establish the new facility.
-
Industry: Manufacturing
State: Karnataka
Investment Range: From 5000 Million to 49999 Million
17 February 2025
Rs.30000 Million New Integrated Solar Module Mfg. Plant in Madhya Pradesh
Executive Summary: A new integrated solar module manufacturing plant is being set up in Narmadapuram near Bhopal, Madhya Pradesh. Spanning 60 acres, the facility will have a 3 GW annual production capacity for ingots, wafers, and solar cells. With an investment of Rs. 30,000 million, pre-project activities are underway as of February 2025.
-
Industry: Manufacturing
State: Madhya Pradesh
Investment Range: From 5000 Million to 49999 Million
17 February 2025
Expansion of Mfg. of Plastic Molded Double Edge Razor Body Project in Baddi, Himachal Pradesh
Executive Summary: A manufacturing facility in Baddi, Himachal Pradesh, is set to expand its production of plastic molded double edge razor bodies from 1.12 billion to 2.44 billion units per year. With an estimated cost of Rs. 560 million, the project has received consent from state pollution control authorities as of February 2025, paving the way for increased production.
-
Industry: Manufacturing
State: Himachal Pradesh
Investment Range: From 100 Million to 999 Million
14 February 2025
New Toughened Glass Mfg. Unit in Dehradun, Uttarakhand
Executive Summary: A new toughened glass manufacturing unit is planned in Industrial Estate, Patel Nagar, Dehradun, Uttarakhand, with a capacity of 1,000 square feet per day. The project, costing Rs. 25 million, is set to begin construction in April 2025 and complete by May 2025. As of February 2025, it awaits environmental clearance from the State Level Impact Assessment Authority.
-
Industry: Manufacturing
State: Uttarakhand
Investment Range: Less than 100 Million
14 February 2025
New Plastic & Rubber Products Mfg. Project in Mahabubnagar District, Telangana
Executive Summary: A new plastic and rubber products manufacturing project is planned in Mahabubnagar, Telangana, involving the production of XLPE foam tubes, sheets, nitrile rubber insulation, and EPDM products. With an investment of Rs. 46 million, the project has received environmental clearance as of January 2025 and aims to enhance production capacity in the region.
-
Industry: Manufacturing
State: Telangana
Investment Range: Less than 100 Million
12 February 2025
